British Standards发表评论(0)编辑词条

British Standards are produced by BSI Group which is incorporated under a Royal Charter and is formally designated as the National Standards Body (NSB) for the UK. Products and services which BSI certifies as having met the requirements of specific standards within designated schemes are awarded the Kitemark.

BS 0 A standard for standards specifies Development, Structure and Drafting of British Standards themselves.
BS 31 steel conduit and fittings for electrical wiring
BS 88 cartridge fuses for voltages up to and including 1000 V a.c. and 1500 V d.c.
BS 196 for protected-type non-reversible plugs, socket-outlets cable-couplers and appliance-couplers with earthing contacts for single phase a.c. circuits up to 250 volts
BS 308 a, now deleted standard, for engineering drawing conventions having been absorbed into BS 8888.
BS 336 for fire hose couplings and ancillary equipment
BS 381 for colours used in identification, coding and other special purposes
BS 476 for fire resistance of building materials / elements
BS 499-1 Welding terms and symbols. Glossary for welding, brazing and thermal cutting
BS 546 for mains power plugs and sockets (older standard)
BS 857 for safety glass for land transport
BS 1088 for marine plywood
BS 1192 for Construction Drawing Practice. Part 5 (BS1192-5:1998) concerns Guide for structuring and exchange of CAD data.
BS 1361 for cartridge fuses for a.c. circuits in domestic and similar premises
BS 1363 for mains power plugs and sockets
BS 1377-9:1990 The standard penetration test (SPT) is an in-situ dynamic penetration test designed to provide information on the geotechnical engineering properties of soil.
BS 1852 resistor and capacitor value coding
BS 2660 Colours for Building and Decorative Paints[2]
BS 3506 for unplasticized PVC pipe for industrial uses
BS 3621 for thief resistant lock assembly. Key egress.
BS 3943 for plastics waste traps
BS 4573 Specification for 2-pin reversible plugs and shaver socket-outlets
BS 4293 for residual current-operated circuit-breakers
BS 4343 for industrial electrical power connectors
BS 4800 for paint colours used in building construction
BS 4900 for vitreous enamel colours used in building construction
BS 4901 for plastic colours used in building construction
BS 4902 for sheet / tile floor covering colours used in building construction
BS 4960 for weighing instruments for domestic cookery
BS 4962 for plastics pipes and fittings for use as subsoil field drains
BS 5252 for colour-coordination in building construction
BS 5400 Steel, concrete and composite bridges.
BS 5400-1 General statement
BS 5400-2 Specification for loads
BS 5400-3 Code of practice for design of steel bridges
BS 5400-4 Code of practice for design of concrete bridges.
BS 5400-5 Code of practice for design of composite bridges
BS 5400-6 Specification for materials and workmanship, steel.
BS 5400-7 Specification for materials and workmanship, concrete, reinforcement and prestressing tendons.
BS 5400-8 Recommendations for materials and workmanship, concrete, reinforcement and prestressing tendons.
BS 5400-9.1 Bridge bearings. Code of practice for design of bridge bearings.
BS 5400-9.2 Bridge bearings. Specification for materials, manufacture and installation of bridge bearings.
BS 5400-10 Code of practice for fatigue.
BS 5400-10C Charts for classification of details for fatigue
BS 5499 for graphical symbols and signs in building construction; including shape, colour and layout
BS 5544 for anti-bandit glazing (glazing resistant to manual attack)
BS 5750 for quality management, the source for ISO 9000
BS 5837 for protection of trees during construction work
BS 5930 for site investigations
BS 5950 for structural steel
BS 6312 for telephone plugs and sockets
BS 6651 code of practice for protection of structures against lightning
BS 6701 installation, operation and maintenance of telecommunications equipment and telecommunications cabling
BS 6879 for British geocodes, a superset of ISO 3166-2:GB
BS 7430 code of practice for earthing
BS 7671 Requirements for Electrical Installations, The IEE Wiring Regulations, produced by the IET.
BS 7799 for information security, the source for ISO/IEC 27001, 27002 (former 17799), and 27005
BS 7901 for recovery vehicles and vehicle recovery equipment
BS 7925-1 Vocabulary of terms in software testing
BS 7925-2 Software component testing
BS 8110 for structural concrete
BS 8485 for the characterization and remediation from ground gas in affected developments
BS 8494 for detecting and measuring carbon dioxide in ambient air or extraction systems
BS 15000 for IT Service Management, (ITIL), now ISO/IEC 20000
BS 3G 101 for general requirements for mechanical and electromechanical aircraft indicators